Roseville Repipe
Skip to main content

Roseville Repipe: Polybutylene Pipe Replacement in Roseville, CA

Roseville Repipe replaces polybutylene pipe in Roseville, CA homes. Polybutylene is the gray plastic water line used in a lot of homes built from the late 1970s to the mid 1990s, and it has a long record of cracking and failing. We take it out and put in new PEX or copper before it floods your house.

Monday to Saturday, 7:00 AM to 7:00 PM

Get a Free Repipe Quote

By submitting, you agree to our Privacy Policy and Terms of Service.

What is polybutylene pipe?

Polybutylene is a plastic resin that was made into water supply pipe. It was cheap, flexible, and fast to install, so builders used it in millions of homes. It's usually gray. Sometimes it's blue or black, especially for the water line in the yard.

The fittings that connect it were often plastic with metal crimp rings, or copper or brass with crimp rings. The fittings and the pipe both turned out to be weak spots.

Why does polybutylene pipe fail?

It breaks down over time. Many plumbers and experts blame chemicals used to treat drinking water, like chlorine, for wearing down the plastic from the inside. The pipe gets brittle, small cracks form, and then it splits. Fittings crack and leak too.

The worst part is that it usually fails without warning. A pipe that looks fine on the outside can split inside a wall or ceiling and run until someone notices the damage.

The big class action over polybutylene plumbing, Cox v. Shell Oil, was settled in 1995. It covered polybutylene plumbing with acetal insert fittings installed between January 1, 1978, and July 31, 1995. That window is a good rule of thumb for which homes may have it.

Source: CONTRACTOR magazine on the polybutylene settlements

Do Roseville area homes have polybutylene pipe?

Some do. A lot of homes in Roseville, Citrus Heights, Antelope, and Rocklin were built in the 1980s and early 1990s, right in the polybutylene years. Not every house from that time got it. Some builders used copper. Some homes have been repiped since.

The only way to know is to look. Check these spots:

  • Where the water line comes out of the wall at the water heater
  • Under bathroom and kitchen sinks
  • Behind the washing machine
  • In the attic, if lines run over the ceiling
  • Where the main line comes up out of the ground near the house

Gray plastic pipe stamped "PB2110" is polybutylene. If the pipe under your sink is copper but you see gray plastic in the attic, the copper may just be the stub coming out of the wall.

Can you just fix the leaks as they happen?

You can, but it's a gamble. Every polybutylene leak tells you the rest of the pipe is the same age and made of the same plastic. Fixing one fitting doesn't make the next one stronger.

The other problem is where it fails. A leak under a sink is easy to see. A leak in the attic or inside a wall can soak insulation and drywall and grow mold before anyone knows. That's why most people with polybutylene replace all of it at once.

What do we replace polybutylene with?

Most homeowners go with PEX. It's a different plastic, cross-linked polyethylene, and it doesn't have the history polybutylene has. It's flexible like polybutylene, so it can often follow the same routes through the attic and walls. Some homeowners pick copper instead. Compare them on PEX repiping and our PEX vs. copper guide.

If only some of the polybutylene is left in the house, a partial repipe can replace what's still there. If you're seeing water damage and don't know where it's coming from, start with leak detection.

Does polybutylene matter when you sell or insure a home?

It can. Home inspectors often call out polybutylene in their reports, and some buyers walk away from it or ask for a price cut. Some home insurance companies ask about it too. Rules differ by company, so ask your agent.

Replacing it before you list the house takes it off the table. We patch the wall openings when we're done so the house is ready to show. See drywall repair after repipe.

What does polybutylene pipe replacement cost?

It's priced like any whole house repipe: house size, number of bathrooms, one or two stories, attic and crawlspace access, and the new pipe material. If the yard line is polybutylene too, replacing it adds to the job. Read our Roseville repipe cost guide.

Polybutylene pipe FAQs

How do I know if I have polybutylene pipe?

Look for gray plastic pipe at the water heater, under sinks, behind the washer, or in the attic. Many pieces are stamped PB2110.

Is polybutylene pipe still allowed?

It hasn't been sold for home water lines in many years. If it's in your house now, it's old.

Can I still file a claim from the polybutylene lawsuit?

The settlement claim windows from the 1990s are long past. Replacing the pipe now is on the homeowner.

How long does polybutylene last?

There's no set number. Some lasts for decades, and some fails much sooner. It's hard to tell from the outside, which is why most people replace it.

Does homeowners insurance cover polybutylene?

It depends on your policy and your insurance company. Some ask about it and some won't cover certain kinds of pipe. Call your agent.

Can you replace polybutylene in a slab home?

Yes. In most slab homes, the lines already run through the attic and walls, and we replace them the same way.

Related services

Areas we serve

Got gray plastic pipe?

Call or send a photo of the pipe at your water heater. We'll tell you what you have and what it takes to replace it.

Get a Free Repipe Quote

By submitting, you agree to our Privacy Policy and Terms of Service.

Call NowFree Quote