Roseville Repipe
Skip to main content

Roseville Repipe: Leak Detection and Slab Leak Detection in Roseville, CA

Roseville Repipe does leak detection and slab leak detection in Roseville, CA. If your water bill jumped, your meter won't stop moving, or you hear water running behind a wall, we find the leak first. Then you know exactly what needs fixing before anything gets cut open.

Monday to Saturday, 7:00 AM to 7:00 PM

Get a Free Repipe Quote

By submitting, you agree to our Privacy Policy and Terms of Service.

Why find the leak before you fix it?

Because guessing is expensive. Cutting open the wrong wall or breaking the wrong part of a slab costs time and money and doesn't stop the water. Finding the leak first tells you three things: that there really is a leak, which line it's on, and where it is.

That last part decides the fix. A leak in a cold line in an outside wall, a leak in a hot line under the kitchen slab, and a leak in the yard line all get fixed different ways.

What are the signs of a hidden leak?

  • A water bill that's higher than normal with no change in use
  • The water meter moving when everything in the house is off
  • Running water sounds inside walls or under the floor
  • A warm spot on a slab floor
  • Water stains on ceilings or walls
  • Peeling paint, bubbling drywall, or soft baseboards
  • Musty smells in one room
  • A soggy patch in the yard that never dries out
  • Low water pressure that came on suddenly

How can you check for a leak yourself?

You can do a simple meter test before you call anyone.

  1. Turn off every faucet, the dishwasher, the washer, and the sprinklers.
  2. Make sure nobody runs water or flushes during the test.
  3. Find your water meter. It's usually in a box near the street or sidewalk.
  4. Look at the meter's leak indicator or the sweep hand. If either one moves, water is going somewhere.
  5. If you want to know if the leak is inside or outside, shut the main valve at the house and check the meter again.

If the meter stops when you shut the main valve at the house, the leak is likely inside the house. If it keeps moving, the leak may be in the line between the meter and the house. Don't force a stuck meter lid or valve. Call us or your water supplier.

How do we find leaks?

We use more than one method and check our work before anyone cuts anything:

  • Pressure testing: we isolate the hot side and the cold side to see which one is losing pressure.
  • Acoustic listening: sensitive listening gear picks up the sound of water escaping a pipe under a floor or behind a wall.
  • Thermal imaging: a thermal camera can show warm spots from a hot water leak in a slab or wall.
  • Moisture readings: a moisture meter checks drywall, baseboards, and flooring.
  • Line tracing: we trace where pipes run under the slab so we know which line we're hearing.

No one tool works for every house. A leak under thick tile sounds different from one under carpet, and a cold line doesn't show up on a thermal camera. Using a few methods together is how you get it right.

What happens after we find the leak?

We show you where it is and walk you through the options. Depending on the leak, that could be:

We'll tell you which one we'd pick and why. Our slab leak signs and options guide covers this in more detail.

Do leaks under a Roseville slab show up on the water bill?

Usually, yes. A slab leak runs all day and all night, so even a small one adds up. A sudden jump on the bill is one of the most common reasons people call us. If you're watching your water use closely, compare your bill to the same month last year, not just last month, since summer watering changes things a lot.

What does leak detection cost?

It depends on the size of the house, how many lines need testing, and how hard the leak is to pin down. A simple leak near a fixture is quick. A slab leak under tile in a big house takes longer. When the leak repair is part of the job, we'll go over the full price before we start the fix.

Leak detection FAQs

Can you find a leak without breaking anything?

Yes. Pressure testing, listening gear, thermal imaging, and moisture readings don't damage the house. We only open a wall or floor once we know where the leak is.

How accurate is leak detection?

Good leak detection gets you very close to the leak. We confirm with more than one method before anyone cuts into a wall or slab.

Can you find leaks in the yard line?

Yes. A leak in the line from the meter to the house often shows up as a soggy spot, a sinkhole, or a meter that keeps moving with the house valve shut.

What should I do if I find a leak?

If water is coming out, shut off the main valve at the house. Then call us. If you can't find the valve, the shutoff at the meter is the backup.

Do you fix the leak too?

Yes. Once we find it, we can fix it with a spot repair, a reroute, a partial repipe, or a water line repair.

Will a leak go away on its own?

No. Leaks in pressurized water lines get worse over time, not better.

Related services

Areas we serve

Water going somewhere it shouldn't?

Call us. We'll find the leak and tell you what it takes to fix it.

Get a Free Repipe Quote

By submitting, you agree to our Privacy Policy and Terms of Service.

Call NowFree Quote