Roseville Repipe
Skip to main content

Roseville Repipe Questions and Answers

These are the repipe and leak questions we hear most from people around Roseville. If yours isn't here, call or send it with the form.

Monday to Saturday, 7:00 AM to 7:00 PM

Get a Free Repipe Quote

By submitting, you agree to our Privacy Policy and Terms of Service.

Cost questions

What's the biggest thing that sets the price of a repipe?

The number of bathrooms and fixtures. After that, one or two stories, slab or crawlspace, attic access, and PEX or copper.

Why is copper more expensive than PEX?

The pipe costs more, and every turn needs a fitting that has to be soldered or pressed. PEX bends, so it needs fewer fittings.

Does the price include drywall patching?

Ask any company you get a quote from. On our jobs, drywall patching is part of the conversation from the start.

Will the price change once the job starts?

Only if the house turns out different from what we saw, like hidden damage or pipe that wasn't visible. If that happens, we talk it through with you before we keep going.

Questions about the job

How long does a whole house repipe take?

Most single-family homes take one to three days of pipe work. Drywall patching comes after the inspection.

Can I stay home during a repipe?

Yes. Water is off for parts of the day while we tie in the new lines, and we tell you the times ahead.

How many holes will you cut in my walls?

As few as we can. PEX bends around corners, so a PEX repipe usually needs fewer and smaller openings than copper.

Do you replace drain lines?

No. A repipe is the water supply lines. Drains and sewer lines are a different system.

What is a manifold?

A central block near the water heater with a separate line and shutoff for each fixture. It lets you shut off one fixture without shutting down the house.

Questions about leaks

How do I know if I have a slab leak?

A warm spot on the floor, the sound of running water, a water bill that jumped, or a meter that moves when everything is off.

What's the difference between a reroute and a direct repair?

A reroute runs a new line through the attic or walls and abandons the leaking one. A direct repair opens the floor and fixes the pipe at the leak.

Can one leak mean I need a repipe?

One leak can be a one-off. Two or three in a short time usually means the pipe is wearing out.

Permit and local questions

Does a repipe need a permit in Roseville?

Yes. The City of Roseville requires a building permit for plumbing work like a repipe, and an inspector checks the new pipe before the walls close.

Who issues permits in Granite Bay and Antelope?

Neither one is a city. Placer County issues permits in Granite Bay, and Sacramento County issues permits in Antelope.

What is the pre-1994 fixture rule?

For homes built before January 1, 1994, Roseville's handout on the state water conservation law says water conserving fixtures must be installed throughout the home as a condition of a building permit.

Do you call 811 before digging a water line?

Yes. California requires contacting USA North 811 at least two working days before digging so utility lines get marked.

Still have a question?

Call us or send it with the form. We'll give you a straight answer.

Get a Free Repipe Quote

By submitting, you agree to our Privacy Policy and Terms of Service.

Call NowFree Quote